Producto añadido correctamente a su carrito de compras
Hay 0 artículos en su carrito. Hay 1 artículo en su carrito.
Sólo por Internet
IK Multimedia AmpliTube Ampeg SVX Power DUO Bundle - Guitar & Bass Amplifier and Cabinet Emulation Software (Download)
FAB # AT-PDAP-DID-IN
Nuevo producto
- AmpliTube 4 and Ampeg SVX
- Pedalboard, Effects Loop, and Rack FX
- Selectable Mic and Mic-Room Emulations
- 5 Amp-Cab Models New to Version 4
- Ampeg Bass Amp and Cab Emulations
- Suitable for Studio and Live Performance
- 8-Channel DAW in Standalone Version
- 4-Channel, Midi-Controllable Looper
- Standalone, AU, VST2, VST3, & AAX
- Mac and Windows Compatibility
- Enviar a un amigo
- Sacar de mis favoritos
- Agregar este producto a mis favoritos
- Imprimir
Más Información
Available for download, the AmpliTube Ampeg SVX Power DUO Bundle from IK Multimedia gives you AmpliTube 4 and Ampeg SVX in one package, providing you with modeled amplifiers, cabinets, stompboxes, and effects racks for use with electric guitars and electric basses. In standalone mode, this software can also function as an 8-channel DAW with full recording, looping, editing, mixing, and exporting capabilities—as well as the ability to switch between presets instantaneously via any compatible footswitch, thus making this application suitable for live gigs. Used in any DAW such as Pro Tools or Logic, the software allows you to approximate a more realistic guitar tone.
In addition to AmpliTube 4, this bundle includes Ampeg SVX, a collection of emulations which aim to digitize the distinctive tone of Ampeg bass rigs. With this download you get four amplifier emulations, six cabinet models, six microphone setups for the cabinets, and eight stompbox simulations.
It is also worth noting that the tools in this bundle work well in conjunction with analog synths, electric pianos, drums, and even soft synths. This software is compatible with Mac and Windows platforms, and will work in VST2, VST3, AU, and AAX formats running at 64-bit.
-
AmpliTube 4 - Guitar Amplifier and Cabinet Emulation Software (Download)
Available for download, AmpliTube 4 from IK Multimedia provides amplifier, cabinet, stompbox, and effects-rack emulations for electric guitars and electric basses. In stand-alone mode, this software can also function as an 8-channel DAW with full recording, looping, editing, mixing, and exporting capabilities. Used in any application such as Pro Tools or Logic, the software allows you to process DI'd guitar and bass through simulations of various guitar-related gear-pieces, and thus approximate a more realistic tone.
Essentially, AmbliTube 4 provides you with an emulated pedalboard, a simulated effects loop, a modeled amplifier, a cabinet stage, and an effects rack, all of which are yours to tweak however you see fit. Not only that—you get two sets of the aforementioned items, and you're able to route your signal through each model in any manner you choose; mono chains, stereo setups, and dual stages of amplification are possible, as are creative combinations in practically any assortment you could cobble together.
It is also worth noting that the tools in AmpliTube 4 work well in conjunction with analog synths, electric pianos, drums, and even soft-synths. This software is compatible with Mac and Windows platforms, and will work in VST2, VST3, AU, and AAX formats running at 64-bit.
AmpliTube 4 Highlights
- Dynamic Response through Sponge & Sag
- The amplifier/cabinet combinations in AmpliTube 4 utilize "Sponge and Sag" processing to replicate, in a more faithful manner, the dynamic interaction between the power amp and the speakers, aiming to eliminate the "harshness" found in the upper frequencies of other software
- Acoustic Simulator
- AmpliTube 4 features an Acoustic Sim pedal that aims to transmute your electric guitar into an acoustic; it is tweakable with on-board controls and features three styles of acoustic body and body-tops
- Effects-Loop Stage
- AmpliTube 4 provides an additional slot in the signal chain right after the pre-amp section but before the power stage; this slot lets you add in up to four daisy-chained effects (including all of the stompboxes) for signal processing before hitting the power section
- Put Effects Anywhere in the Chain
- You can use many of the stompbox and rack effects in any of the rack-effects slots; conversely, you can use rack effects in the stompbox slots too
- 8-Channel Recorder
- AmpliTube 4 can operate as an 8-channel DAW, allowing you to capture, loop, edit, mix, and export audio in the stand-alone application
- MIDI-Controllable Looper
- Dubbed the Super Looper, this feature is a 4-part looping station suitable for laying down multi-part backing tracks; each track includes level and panning controls, and can be instantiated by MIDI-foot controller or mouse click
- UltraTuner
- AmpliTube 4 features an upgraded tune-section which delivers accuracy down to 0.01 of a cent
- Built-In Custom Shop
- Additional software modeled in conjunction with Fender, MESA/Boogie, Ampeg, Orange, Soldano, Groove Tubes, Gallien-Krueger, Jet City Amplification, THD and T-Rex, Fulltone, Z.Vex, Carvin, Morley, Wampler Pedals, Dr. Z, ENGL and more are available for demo and purchase within the plug-in
- British Series Amps
-
- Brit 8000 (based on the JCM800)
- Brit 9000 (based on the JCM900)
- Red Pig (based on the Marshall Major)
- Brit Silver (based on the Silver Jubilee)
- Brit Valve-Pre (based on the JMP-1)
- 3-Dimensional Cab Room with Selectable Simulators
-
- 3D Room environment emulation
- Select different speaker cabinets from different amps
- Change individual speakers in the same cabinet
- Dual-Mic Placement on any speaker in the cabinet
- 18 microphones can be used in the Cab Room (three standard, 15 available in Custom Shop)
- 29 individual speaker models
- 6 different room scenes
- Cabinet Mixer section to fine-tune and mix all elements
Notable Features
- Signal-Chain Flexibility
- Eight different series/parallel routing options give you flexible signal-chain control, allowing you to configure and customize stereo and mono tones as you see fit; additionally, you can select and customize different configurations on the fly as you see fit
- Easily Switchable Presets for Live Performance
- Any amplitube chain can be saved, organized, and recalled through the preset browser, and then triggered—via universal MIDI control—during live performances or studio sessions, thus enabling you to switch entire amp sounds throughout your gig or record on the fly
- 10 Stompbox Models
-
- Acoustic Sim
- Chorus
- Flanger
- Opto Tremolo
- Delay
- Wah Pedal
- Diode Overdrive
- Compressor
- Graphic EQ
- Volume Pedal (can be controlled by external controller)
- 9 Amplifiers
-
- Brit 8000
- Brit 9000
- Red Pig
- Brit Silver
- Brit Valve Pre
- American Tube Clean 1
- American Tube Clean 2
- British Tube Lead 1
- Solid State Bass Preamp
- 10 Cabinets
-
- 4x12 Brit 8000
- 4x12 Brit 9000
- 4x12 Red Pig
- 4x12 Brit Silver
- 4x12 Brit 30
- 4x10 Open Vintage
- 1x12 Open Vintage
- 2x12 Closed Vintage
- 4x12 Closed Vintage 1
- 1x15 Bass Vintage
- Vintage and Modern Individual Speakers
-
- 29 in total
- 4 Microphones
-
- Double Dynamic 57
- Dynamic 57
- Condenser 414
- Condenser 87
- 2 Rackmount Effects Units
-
- Digital Delay
- Parametric EQ
- Additional Features
-
- Up to 96 kHz sample rate supported
- DAW automation and BPM Synchronization
- Preset database with multiple guitar and bass-oriented tags, keywords, as well as advanced search
- Online sharing service for user presets called “Preset XChange”
- Integration with IK’s range of audio interfaces and controllers such as iRig HD, iRig Pro, iRig 2
- Export loops to hard drive and import into the DAW section; import audio to track 1 in looper for playing over backing track loop
- Imports any WAV, AIFF, SD2, Apple CAF, FLAC, or MP3 audio file (stand-alone version)
- SpeedTrainer for speeding up/slowing down imported tracks without affecting the pitch - useful for practicing and transcribing (standalone version)
-
Ampeg SVX - Bass Amplifier and Cabinet Emulation Software (Plug-In, Download)
Available for download, IK Multimedia’s Ampeg SVX is software that emulates the world-renowned and well-regarded sound of Ampeg amplifier heads and speaker cabinets. It also provides models of the microphones used to capture these cabinets in the studio, as well as a comprehensive pedalboard with overdrive, wah, chorus, envelope filtering, and more. You’ll even find a digital, accurate, and chromatic tuner.
It is primarily intended to be used with electric basses, though it has been known to sound good on guitars, keyboards, or any signal to which you’d like to lend the sound of an emulated bass amplifier. Indeed, it has been designed with a stereo path to encourage such experimentation.
The software uses Dynamic Saturation Modeling and Volumetric Response Modeling technologies to provide a realistic emulation of Ampeg gear. As such, it is a suitable choice for producers, mixing engineers, and other studio stalwarts looking to impart more mojo upon a relatively dry DI’ed bass tone. It should be noted, however, that integration with IK Multimedia’s series of hardware products offers you the ability to use this software onstage, and therefore, to bring the sound of Ampeg hardware to your live gig in a comparatively compact form factor.
Many presets have been provided to get you started. They are tagged extensively for advanced search, and are designed to offer great bass timbres out of the gate. Any preset you build for yourself can be shared, if you choose, using Preset Xchange—though you can also keep them to yourself; the decision is yours.
The software operates in 64-bit, is compatible with Mac and Windows platforms, and works in Audio Units, VST2, VST3, and AAX formats. It also operates as a standalone application, in which case you’ll have access to a multitrack recorder to capture ideas.
Key Features
- Pedalboard with Eight Stompboxes
- In this section, you'll find a selection of bass-tone modifiers in stompbox form. These bass behemoths include the SCP-OD Bass Overdrive, the SCP-OCT Bass Octave, an analog chorus, analog delay, envelope filter, bass wah, compressor and volume pedal. These can be arranged in any order you choose, and they drive the amplifier-head directly. Also, you can assign knobs (parameters) to a controller like the StealthPedal with a simple right-click of the mouse.
- Four Modeled Amplifier Heads
- The Ampeg SVX provides four amp heads for use: the SVT-CL, the B-15 PortaFlex, the SVT-4Pro, and the BA500. The SVT-Classic provides Ampeg's patented hi- and low-boost buttons, as well a traditional three-band tone stack with selectable center frequencies, a gain knob, and a master knob. The PortaFlex offers a more vintage tube-like tone. The BA-500 and the SVT-4Pro both offer graphic EQ's alongside their traditional tone stack, though the SVT-4Pro also provides onboard compression. The BA-500 is modeled on a combo-amplifier, but the preamp and power sections have been separated from the cabinet sections with digital, surgical precision.
- Six Modeled Amplifier Cabinets and Corresponding Microphones Provided
- Your choices are as follows: The SVT810E-a mainstay of major tours, arenas, clubs, and stages-the SVT410H, the BXT-410H, the B-15 Single 15", the BA500 2x10, and the PB2x12. All cabinets have been realistically modelled down to the knobs on the back which affect the high frequencies. Any cabinet can be mixed and matched with any amplifier head. You'll also find six microphone choices for capturing the audio of these cabs: four dynamic mics and two condensers. These can be moved around the speaker cones with the click-and-drag of your mouse.